Home

/

Rig #6

Rig #6

Rig stats

Hydraulic Feed System

Pulldown force: 16,000 lbs [7,257.48 kg]
Retract force: 24,000 lbs [10,886.2 kg]
Feed speed, down: 0–71 ft/min [21.64 m/min]
Feed speed, retract: 0–48 ft/min [14.63 m/min]
Feed stroke: 13 ft [3.96 m]
Angle Drilling
In-out slide base: 10 in [254 mm] of travel
Adjustable auger guide support

Power Unit

Deck engines: Cummins
PTO: Transmission or transfer case ?

Hydraulic Pumps

Primary pump: 36 gpm [136.3 l/min]
Auxiliary pump: 24 gpm [90.85 l/min]

Drill Head Rotary

10-SPEEDS
Maximum rotary speed: 837 rpm [87.65 rad/s]
Optional: 1,060 rpm [111 rad/s]
Torque: 8,600 ft-lbs [11,660 Nm]

Estimated Operating Capacities

Hollow stem augers, 3-1/4 in [82.55 mm] ID: 150 ft [45.72 m]
Continuous flight auger, 6 in [152.4 mm] OD: 300 ft [91.44 m]
Continuous flight auger, 14 in [355.6 mm] OD: 60 ft [18.27 m]
Rotary drilling, 2-7/8 in IF: 1,500 ft [457.2 m]:
Diamond core drilling, NQ: 1,200 ft [365.76 m]
Note: Above drilling capacities may vary according to subsurface conditions

Hoist

MAIN—SINGLE LINE CAPACITY: 8,500 LBS [3,855.54 KG]
Line speed: 0–75 fpm [0–22.86 mpm]
Line speed – Reverse: 0–325 fpm [0–99.06 mpm]
Cable diameter: 1/2 in (.500) [12.7 mm]
Cable length: 100 ft [30.48 m] standard
AUXILIARY—SINGLE LINE CAPACITY: 4,500 lbs [2,041.17 kg]
Line speed: 0–135 fpm [41.15 mpm]
Cable diameter: 5/16 in (.325) [8.26 mm]
Cable length: 75 ft [22.86 m] standard
SAFE-T DRIVER—SINGLE LINE CAPACITY: 900 lbs [408.23 kg]
Line speed: variable up, freefall down
Cable diameter: 1/4 in (.250) [6.35 mm]
Cable length: 300 ft [91.44 m] standard
WIRELINE—SINGLE LINE CAPACITY: 1,200 lbs [544.3 kg]
Line speed: 0–500 fpm [0–152.4 mpm]
Cable diameter: 3/16 in (.185) [4.7 mm]
Cable length: 400 ft [121.92 m] standard
Winch capacity: 3,500 ft [1,066.8 m] cable

SPT Automatic Hammer

ASTM D-1586 standards, standard duty and heavy duty
140 lb [63.5 kg], 170 lb [77.1 kg]
300 lb [136.1 kg]
340 lb [154.2 kg]
Hydraulic self-compensating  

Claim your free quote